Secure Cart | My Order: 0 Products | Total: 0.00 US $
McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Mechanics : Statics

View:
Items per page: 15 | all    Page 1 of 2 >>
U10074: Universal Spirit Level, 250 mm

Universal Spirit Level, 250 mm

Spirit level made of shock-resistant plastic for measuring angles to horizontal, vertical and inclined planes and for joinery. With two plexiglass level gauges, resistant to breakage and leakage. Horizontal gauge built-in and accurately calibrated. Gauge for measuring inclination can be rotated and fixed in place. Scale markings for ...

Item: U10074
US $  37.00
U15014: Set of 6 Steel Balls

Set of 6 Steel Balls

Ball bearings made of hardened and polished steel. Can be used with a guide rail for experiments on elastic collisions or in combination with watch glasses to demonstrate various states of equilibrium. Rail not included.
Diameter: 30 mm each
Weight: 110 g each

Item: U15014
US $  24.00
U15015: Plumb with Line

Plumb with Line

Brass body with a line.
Height: 100 mm
Diameter: 20 mm
Weight: 220 g
Line length: 1600 mm

Item: U15015
US $  19.00
U15026: Wooden Blocks for Friction Experiments

Wooden Blocks for Friction Experiments

Two wooden blocks with a plastic-coated surface and hook for attaching a dynamometer.
Dimensions: 120x60x60 mm³ and 120x60x30 mm³



Item: U15026
US $  17.00
U15031: Circular disc

Circular disc

Plastic disc for demonstrating various states of equilibrium. Equipped with two boreholes for stainless-steel rods with a maximum diameter of 10 mm.
Disc diameter: 200 mm.

Additionally required:
Stand equipment

Item: U15031
US $  10.00
US $  6.68
U15032: Centre of Gravity Plate

Centre of Gravity Plate

Plastic plate with 6 boreholes for introducing the concept of centre of gravity and determining centroids.

Item: U15032
US $  16.00
U15033: Stability Apparatus

Stability Apparatus

For demonstrating the stability of an object as a function of the position of its centre of gravity above the supporting surface. The position of the centre of gravity can be adjusted by tilting the device. The position of the centre of gravity over the base of the stand is indicated by a built-in plumb bob.
Dimensions: 180x150x290 mm³

Item: U15033
US $  73.00
U30015: Inclined Plane

Inclined Plane

Equipment for investigating forces acting on a body on an inclined plane, and determining the holding friction as a function of the angle of inclination. Metal base and inclined plane. The plane is hinged with scales for angle, length and height. Angle of inclination can be adjusted between 0 and 45°. Includes adjustable pulley, ...

Item: U30015
US $  115.00
U40840: Wheel on axle

Wheel on axle

For a vivid demonstration of mechanical advantage and conservation of energy. Fitted with four coaxial pulleys of 35, 50, 65, and 105 mm diameter. The wheel is fitted with a ball bearing, which turns on a single steel rod. The apparatus can be held in place with a simple standard laboratory right angle clamp.

Item: U40840
US $  12.00
U40845: Pulley on a tripod rod

Pulley on a tripod rod

For experiments on the inclined plane and similar experimental configurations. Consists of a plastic pulley with a cord groove mounted on a chrome-plated steel rod.

Pulley diameter: 40 mm
Rod diameter: 8 mm
Total length: 150 mm

Item: U40845
US $  5.00
U40866: Friction apparatus

Friction apparatus

For demonstrating the dependence of frictional force on weight and contact area. Consists of a 500x50 mm board, 100x40x 25 mm sliding block, 100-g spring balance and three 50 g auxiliary weights. The board and block are made of pine wood.

Item: U40866
US $  25.00
US $  14.77
U49519: Economy Lever

Economy Lever

Used to study mechanical leverage and balance. A movable fulcrum can slide along and be fastened on any point of a 50cm meter stick. Various weights can then be applied to balance the system and to study leverage systems. Consists of a 50cm meter stick, stand, three knife edge clamps, one 50 gram hooked weight and one 100 gram hooked ...

Item: U49519
US $  41.00
U49520: Knife Edge Clamp (accessory for New York Balance)

Knife Edge Clamp (accessory for New York Balance)



Item: U49520
US $  2.00
U52004: Force Table

Force Table

Equipment for quantitative investigation of the combination and resolution of forces, consisting of a circular workplate on a stable base with dual protractor scale. Weights from set of three weight holders with slotted weights (U30019) (included), are suspended from 3 cords strung over pulleys with ball bearings.
Dimensions: ...

Item: U52004
US $  341.00
U52011: Extra Pulley

Extra Pulley

Additional pulley for use with the force table (U52004) with clamp, cord and holder with set of slotted weights 2x 5 g, 2x 10 g, 2x 20 g and 3x 50 g.

Item: U52011
US $  58.00
Items per page: 15 | all    Page 1 of 2 >>
Home
About 3B
Customer service
Online media
Policies
Sitemap
Links
Company profile
Facts & figures
Quality
Careers
Press
Tradeshows
Free catalog
Join mailing list
Contact
Contact persons
Address
Order Form
Product manuals
3D animations
Videos
Downloads
Physics experiments
3B Blog
Policies & Guarantees
Privacy policy
9 reasons
Environmental policies
Copyright © 2000 - 2010 3B Scientific. All rights reserved.
Server SSL Certificate